Strut tower mount only. Kit is complete with Red/blue AN fittings, Russel proclassic hose, heat shrink hose clamps, and of course the Bob's Auto Sports catch can.
GT500 Oil Seperator - 07-14 GT500 Oil Seperator
Keep HP robbing oil out of your intake with Bob's Auto Sports oil seperator.
Full kit, includes bracket, hoses and all mounting hardware, as well as detailed instructions.
Developed to eliminate oil from entering your intake by engine blow-by, which channels oil contaminated air into your supercharger.
A key problem caused by oil in the intake is that it reduces the octane of your fuel and causes detonation especially in turbo, supercharger and nitrous applications.
Featuring a large chamber, and superior filtering media, this is the unit to have for road racers. Draining the fluid is easy with a valve in the bottom.
USA made, with metal fittings, this unit is built to last.
Free shipping in the 48 states.
Posted by Unknown on 6th Apr 2017
2014 gt500
Great service and great product
Posted by Jordan Quilico on 25th Sep 2016
I recently purchased the piano black catch cans with black fittings from Revan Racing, and they look so good under the hood. The braided hoses with black anodized fittings look super clean, and they are a perfect match for the Revan Racing fuel rails with black Fore fuel fittings. I have one of those friends that likes to pick on every little thing, but when he saw these catch cans he said oh wow those are beautuful...they must have cost $600+. Very high quality and incredible craftsmanship.
Posted by Blake Hollis on 4th May 2016
I've had this oil seperator on my Shelby now for 3 months and it works great...looks good as well.
Posted by Scooter Grigsby on 4th Feb 2016
Real quality pieces. Passenger side piece of cake, driver side PITA to build brackets for and make it look stock. The bracket supporting the air inlet tube could actually be used to support the catch-can with hose clamp and this would be easy install as well.
Posted by Ed Presutti on 22nd Oct 2015
These oil separators are fantastic. Beautiful construction, nice braided hoses, and solid fittings. The instructions are good and all hoses were cut to length for my GT500 so installation was a snap. A few turns of a wrench, some hose routing, and they're on and working as expected. Two recommendations when installing : When removing the factory fittings from the old hoses, use hot water to soften the hoses up. (The instructions mention this as well) Also, when doing the drivers' side, route the hoses below the air intake.
Well done BAS and thanks to Van @ Revan for recommending them.
Posted by Doug on 11th Apr 2015
Very easy to install and CF looks great. 5 passes down the 1320 and already collected a small amount of oil.
Posted by Nicholas on 8th Mar 2015
The GT500 is an ultimate car, it needs the ultimate separator. This is the most expensive catch can I have seen but if you want the best you gotta pay for the best. I was gonna get one with a cobra on it but after searching the Internet Bob's was what people in the know said was best. Car is black with black stripes so I got the piano black separator with black fittings. Poured boiling water on stock hose to remove fittings in case I ever wanted to revert back. Very pleased with quality and looks, looks stock. Will be buying driver side.
Posted by Chip on 2nd Mar 2015
I've had the JLT separators for 1.5 years now and doing the switch to the Bob's because they're just a better product and going to give me better protection.
Posted by Daniel on 17th Sep 2014
Don't get cheap out on this part for your GT500 if you are planning on keeping it for a long time. This is a well built catch can! If you saw this can sitting next to its competitor you would understand why its a little more money.
Posted by Jay Q on 1st Jun 2014
Great product. Looks great and came with all parts to complete.
Posted by Thomas on 13th Feb 2014
a really well made product, I installed both passenger and driver side oil separators and fit and finish is excellent very easy to in stall, everything comes in the box! I would recommend to everyone...thanks Van!
Posted by Bob Austin on 5th Aug 2013
This full kit is assembled using the highest quality material. Fully installed in 30-minutes. Looks great and highly recommend this product.
Posted by Unknown on 5th Jul 2013
Superb quality product and pachaging
Posted by Brian Z. on 11th Jun 2013
Excellent quality and easy to install. Product has a factory look to it only the well informed notice it. Glad to be able to keep oil out of the blower.
Posted by Dennis Parisien on 22nd May 2013
Easy installation, took about 20 minutes. All you need is a razor knife, heat gun and allen wrench. You use your factory fittings on the motor. The GT500 actually runs better, definitely a must buy even if your not running mods. I'm very happy with Bob's Oil Seperator.
Posted by Rick on 13th May 2013
Great looking product. Installation was simple & fit perfect. Great addition.
Posted by Kurtdog on 30th Apr 2013
Fit was spot on right out of the box. Did not even have to trim the hoses. Drained oil after 8 hr road trip and had a couple of table spoons of oil that were not sent through the blower. This mod should be at the top of your list.
Posted by Jeff (gsstage2) on SVT on 29th Apr 2013
Outstanding product! Looks great and works as all says!
Posted by aclass on 19th Apr 2013
I would highly recommend the Bob's Ultimate separator. Everything necessary for an easy install and the fit was as good as the quality. You will not be disappointed.
Posted by Stephen P Hoke on 14th Mar 2013
Just installed the Black Ultimate Bob's Oil Separator. Installation was a snap!! Hose length was spot on right out of the box and the
the shrink clamps sealed nicely with a heat gun. The unit easily cleared my Ford Racing strut tower brace on my 2013 GT 500. I ordered an OEM hose/vent so that I can revert to stock if necessary.